Insert Die Tic Materials for High Manganese Steel Spares/Replacement Parts

  • Classification: Tic Rod
  • Application 2: Improve The Service Life of Equipment
  • Application 4: Used for Heavy Machinery Gear Tunneling of Roadhea
  • Transport Package: Carton Box or Iron Drum
  • Origin: Changsha Hunan
  • Application 1: Used for Welding on The Crusher Hammer Head
  • Application 3: Used as Wear Parts
  • Trademark: LFJS
  • Specification: 30cm x 30cm x 31cm
  • HS Code: 820900900

                             QUALITY ENHANCE THE VALUE, SERVICE TO WIN THE TRUST

                                        Titanium Carbide Cermet Rods/TiC Cermet rods

Tel.: +86-15974242234
Fax: +86-731-86868583

 
 

 

TiC rods for casting on crusher accessories for increasing the service life introduction:

insert die TiC materials for  High Manganese Steel spares/replacement parts

The new type high manganese steel crusher hammer with TiC cermet rod is a good substitute for high manganese cast iron complex crusher hammer.It solves the problem of easy to be broken with high hardness in high manganese crusher hammer, furthermore, the wear life could be increased 1.5 times, delivering fewer change-outs, more up time ,and lower maintenance costs. The titanium carbide inserts provide structural strength to the hammer while the manganese or wear alloy give the hammer the flexibility to handle the impact. Both alloys work together to lengthen the overall wear life of the wear part.
Diameter range(mm):   (D)8-45mm
Length range(mm):        (L)30-100mm
Hot sale sizes(mm):       D12x50     D14x60   
                                         D12x40     D14X40    D12X60  D12*80

                                         D16X90    D20X40/50/60

Insert Die Tic Materials for High Manganese Steel Spares/Replacement Parts

 

TiC rods for casting on crusher accessories for increasing the service life application:

insert die TiC materials for  High Manganese Steel spares/replacement parts

1,TiC Based Cermets are mainly used hammer heads, jaw plates, blow bars, blow liners, breaker blocks, impact plates, liner plates, tooth points, crush rollers, products for Asphalt, Recycling, Cement, and Coal-Fired Power Plants, as well as the Concrete and Rock Crushing Industry.etc,To improve the service life of equipment.  

 

2,Wear-resistant alloy parts materials  is mainly used  for heavy machinery

 gear tunneling of road header which plays an important role in improveing boring machine life

,it can improve service life. Pick contact directly with the rock , so it is life directly influence boring machine's efficiency.Lot of boring machine such as S100,EBJ1600 with a lot of disadvantages like low hardness,

poor wear resistance,big coefficient of friction,poor corrosion resistance,low thermal conductivity and so on .The titanium carbide based cermet can be used in bad working environment,

and it can growth the life.The titanium have strong high temperature resistant corrosive,so it is composite materials also have such characteristics.
Insert Die Tic Materials for High Manganese Steel Spares/Replacement Parts



 

TiC rods for casting on crusher accessories for increasing the service life parameters:

insert die TiC materials for  High Manganese Steel spares/replacement parts

Insert Die Tic Materials for High Manganese Steel Spares/Replacement Parts
 

Below is the design chart we made for our European customer on the high manganese wear parts bottom side:

Insert Die Tic Materials for High Manganese Steel Spares/Replacement Parts

insert die TiC materials for  High Manganese Steel spares/replacement parts

Using steps as follows:

1) .Please soak TiC rods into borax solution, dry them before use. (Borax resolution: deoxygenation process and make sure the tight bonding with TiC rods and wear parts.) [For fresh TiC rods, ignore this step] 2).Weld iron nails onto TiC rods. (electrical arc welding or argon arc welding both OK) The main purpose of iron nails: fix TiC rods in the molds. Because the density of TiC rods is lighter than that of molten steel, to avoid TiC rods floating on the surface of molten steel. Whatever methods adopted, the most important thing is to fix TiC rods in the molds.

3).Put the TiC rods with nails into the mold. (see picture for reference) 4).Pouring molten steel, the casting temperature of molten steel: 1480 degree centigrade for 13% high manganese, and rise temperature accordingly if casting a single wear part over 30kgs.

Insert Die Tic Materials for High Manganese Steel Spares/Replacement Parts
2.For EPC ( Evaporative Pattern Casting) to make crusher hammer head in small /medium size.

Insert Die Tic Materials for High Manganese Steel Spares/Replacement Parts

 Free samples is available for testing. Normally we can ship the goods within 7-15 days!
Tel.: +86-15974242234
Fax: +86-731-86868583

 
 

 


 

Alcohol Wipes

kill 99.9% germs gentle and hvqienic with alcohol

Alcohol Wipes,75% Alcohol Wipes,Antibacterial Alcohol Wipes,Alcohol Wipes for Cleaning Electronics,Individually Wrapped Alcohol Wipes,Antiseptic Alcohol Wipes

Rejoice International, Inc. , https://www.supercleanmedical.com